Revealing the Effect of Surface Composition on Multiwalled Carbon Nanotubes Supported Pt-Fe Alloy Electrocatalysts for Methanol Oxidation Performance

The designs of efficient and inexpensive Pt-based catalysts for methanol oxidation reaction (MOR) are essential to boost the commercialization of direct methanol fuel cells. Here, the highly catalytic performance PtFe alloys supported on multiwalled carbon nanotubes (MWCNTs) decorating nitrogen-doped carbon (NC) have been successfully prepared via co-engineering of the surface composition and electronic structure. The Pt₁Fe₃@NC/MWCNTs catalyst with moderate Fe³⁺ feeding content (0.86 mA/mg_Pt) exhibits 2.26-fold enhancement in MOR mass activity compared to pristine Pt/C catalyst (0.38 mA/mg_Pt). Furthermore, the CO oxidation initial potential of Pt₁Fe₃@NC/MWCNTs catalyst is lower relative to Pt/C catalyst (0.71 V and 0.80 V). Benefited from the optimal surface compositions, the anti-corrosion ability of MWCNT, strong electron interaction between PtFe alloys and MWCNTs and the N-doped carbon (NC) layer, the Pt₁Fe₃@NC/MWCNTs catalyst presents an improved MOR performance and anti-CO poisoning ability. This study would open up new perspective for designing efficient electrocatalysts for the DMFCs field.     

Facile fabrication of oxygen-doped carbon nitride with enhanced visible-light photocatalytic degradation of methyl mercaptan

Research on Chemical Intermediates - Element doping has demonstrated an effective strategy for enhancing photocatalytic performance of carbon nitride (CN). Herein, we reported that oxygen-doped CN...     

白云石制备似立方体状方解石型碳酸钙晶体及其机理研究

以轻烧白云石粉、氯化铵和二氧化碳为原料,在未使用晶型控制剂的情况下,通过蒸氨-沉钙过程制备出了似立方体状碳酸钙。研究了反应温度、溶液中钙离子浓度、通气速率、搅拌速度以及陈化时间对碳酸钙中方解石相含量以及晶体形貌的影响,并探索了沉钙反应的晶型控制机理。结果表明,在反应温度40 ℃、钙离子浓度0.05 mol/L、通碳速率100 mL/min、搅拌速度400 r/min和陈化时间2 h的条件下,制备出形貌规整、粒径分布均匀的似立方体状碳酸钙,平均粒径为5~10 μm。该研究为提升白云石的使用价值、生产高附加价值的碳酸钙产品,以及提高白云石资源的利用率提供理论基础。     

Geometrically nonlinear dynamic analysis of the stiffened perovskite solar cell subjected to biaxial velocity impacts

Nonlinear Dynamics - The perovskite solar cell (PSC) is one of the most promising photovoltaic candidates along with the highly increasing demand for green electricity. One of the main concerns...     

自掺杂SnO2微球的水热合成及其可见光催化性能

本研究采用水热法,以柠檬酸为螯合剂,通过控制n(Sn⁴⁺)/n(Sn²⁺)的数值,合成了由具有丰富氧空位的SnO₂纳米晶体组装成的微球。通过X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、傅里叶红外光谱(FT-IR)、X射线光电子能谱(XPS)及UV-Vis漫反射光谱对SnO₂纳米微球进行表征分析,结果表明:在酸性水热条件和柠檬酸的螯合作用下,二氧化锡纳米晶体聚集形成微球;在Sn⁴⁺/Sn²⁺摩尔比例为3:7时,其微球尺寸最小,整体分散性较好;同时适量二价锡离子的掺杂使得该样品氧空位浓度达到最佳,氧空位的存在将使得样品光吸收范围拓展至可见光,因而该样品显示出较强的可见光催化效率,在8 min内完全降解甲基橙。     

化学势依赖于系统内的所有物质

在热力学中，关于多元系的化学势的变量集，有互不一致的两种结论.一种结论认为，某种物质的化学势，仅仅依赖于其它物质的存在，另外一种认为，不仅依赖于其它物质，也依赖于自己.本文通过详细的分析论证了，一般而言，化学势依赖于系统内的所有物质.     

Pit volume estimation on the stainless steel according to single current transient

Journal of Solid State Electrochemistry - The maximum pit volume is a significant parameter to evaluate the pitting extent on metal materials, which could be associated with the charge transfer...     

n型IBC太阳电池选择性发射极工艺研究

为提升n型叉指背接触(IBC)太阳电池的光电转换效率,采用丝网印刷硼浆和高温扩散的方式形成选择性发射极结构,研究了硼扩散和硼浆印刷工艺对电池发射极钝化性能和接触性能的影响。实验结果表明,在硼扩散沉积时间和退火时间一定的条件下,硼扩散通源(BBr₃)流量为100 mL/min,沉积温度为830 ℃,退火温度为920 ℃时,发射极轻掺杂(p⁺)区域的隐开路电压达到710 mV,暗饱和电流密度为12.2 fA/cm²。发射极局部印刷硼浆湿重为220 mg时,经过高温硼扩散退火,重掺杂(p⁺⁺)区域的隐开路电压保持在683 mV左右,该区域方块电阻仅46 Ω/□,金属接触电阻为2.3 mΩ·cm². 采用该工艺方案制备的IBC电池最高光电转换效率达到24.40%,平均光电转换效率达到24.32%,相比现有IBC电池转换效率提升了0.28个百分点。     

Polyvinylpyrrolidone and graphene-modified hematite nanoparticles for efficient electrocatalytic oxidation of p-nitrophenol

Journal of Solid State Electrochemistry - Polyvinylpyrrolidone (PVP) and graphene (G)-modified iron oxides (Fe2O3-PVP-G) are prepared by a simple hydrothermal reaction. Their morphology and...     

In situ confinement of iron-based active sites within high porosity carbon frameworks with enhanced activity for rechargeable Zn–air battery

Non-noble bifunctional electrocatalysts with robust activity and stability toward oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) are greatly significant but challenging for Zn-air batteries. Here, in situ confinement of FeN_x active sites in high porosity carbon framework (FeN_x/CMCC) derived from chelate of carboxymethylcellulose (CMC) and iron ions were synthesized. Particularly, construction of FeN_x within porous carbon framework accelerates the electron transfer and the sufficient utilization of active centers, and then expedites the reaction kinetics of ORR and OER. As expected, the optimized FeN_x/CMCC exhibits superior ORR activity with a larger half-wave potential of 0.869 V. The rechargeable Zn-air battery delivers a higher power density of 99.6 mW/cm² and a special capacity of 781.9 mA h/g_Zn at 10 mA/cm², together with excellent durability of over 335 h. Remarkably, the as-assembled solid-state battery exhibits a higher open circuit voltage (OCV) of 1.5 V, a special capacity of 709.7 mA h/g_Zn, as well as prolonged cycling stability (90 h). Moreover, the flexible solid-state battery displays negligible loss of electrochemical performance under various bending angles, illustrating its potential application in flexible electronic devices.